User`s manual

PT-G7509 User’s Manual Featured Functions
3-33
Enable Ring 2*
Setting Description Factory Default
Enabled Enables Ring 2.
Disabled This disables Ring 2.
Not checked
*Both Ring 1 and Ring 2 must be enabled when using the dual-ring architecture.
Set as Master
Setting Description Factory Default
Enabled
The PT-G7509 is manually selected as the
master.
Disabled
The Turbo Ring or Turbo Ring V2
protocol will automatically select the
master.
Not checked
Redundant Ports
Setting Description Factory Default
1st Port
Specifies which port on the PT-G7509 will
be used as the first redundant port.
None
2nd Port
Specifies which port on the PT-G7509 will
be used as the second redundant port.
None
Enable Ring Coupling
Setting Description Factory Default
Enable
Specifies that this PT-G7509 will be a ring
coupler.
Disable
Specifies that this PT-G7509 is not a ring
coupler.
Not checked
Coupling Mode
Setting Description Factory Default
Dual Homing Enables dual homing through the PT-G7509. None
Ring Coupling
(backup)
Specifies that the PT-G7509 will be used for a
ring coupling backup connection.
None
Ring Coupling
(primary)
Specifies that the PT-G7509 will be used for a
ring coupling primary connection.
None
Primary/Backup Port
Setting Description Factory Default
Primary Port
Specifies which port on the PT-G7509 will be
used as primary port.
None
Backup Port Specifies which port on the PT-G7509 will be
used as the backup port.
None