User`s manual

PT-G7509 User’s Manual Featured Functions
3-23
1
st
Trap Server IP/Name
Setting Description Factory Default
IP or name
Specifies the IP address or name of the
primary trap server used by your network.
None
1st Trap Community
Setting Description Factory Default
Max. 30 characters
Specifies the community string to use for
authentication.
Public
2nd Trap Server IP/Name
Setting Description Factory Default
IP or name
Specifies the IP address or name of the
secondary trap server used by your
network.
None
2nd Trap Community
Setting Description Factory Default
Max. 30 characters
Specifies the community string to use for
authentication.
Public
Trap Mode
Setting Description Factory Default
Trap
Select this option to use SNMP Trap message to
indicate event occurrence.
Trap
Inform
Select this option to use SNMP Inform message
to indicate event occurrence. SNMPv2 provides
an inform mechanism. When an inform message
is sent from the SNMP agent to the NMS
(network management system), the receiver
sends a response to the sender acknowledging
receipt of the event. This behavior is similar to
that of the get and set requests.
Trap