User`s manual

PT-G7509 User’s Manual Featured Functions
3-14
System File Update—By Remote TFTP
The PT-G7509 supports saving your configuration or log file to a remote TFTP server or local host.
Other PT-G7509 switches can also load the configuration at a later time. The PT-G7509 also
supports loading firmware or configuration files from the TFTP server or a local host.
TFTP Server IP/Name
Setting Description Factory Default
IP address of TFTP
server
Specifies the IP address or name of the remote
TFTP server. This must be specified before
downloading or uploading files.
None
Configuration Files Path and Name
Setting Description Factory Default
Max. 40 characters Specifies the path and file name of the PT-G7509’s
configuration file on the TFTP server.
None
Firmware Files Path and Name
Setting Description Factory Default
Max. 40 characters Specifies the path and file name of the PT-G7509’s
firmware file.
None
Log Files Path and Name
Setting Description Factory Default
Max. 40 characters Specifies the path and file name of the PT-G7509’s
log file.
None
After setting the desired paths and file names, click Activate to save the setting. Click Download
to download the prepared file from the remote TFTP server, or click Upload to upload the desired
file to the remote TFTP server.