User`s manual

PT-G7509 User’s Manual Featured Functions
3-10
NOTE
The PT-G7509 does not have a real time clock. The user must update the Current Time and
Current Date to set the initial time for the PT-G7509 after each reboot, especially when there is
no NTP server on the LAN or Internet connection.
Current Time
Setting Description Factory Default
User-specified time This allows configuration of the local time in
local 24-hour format.
00h:00m:00s
Current Date
Setting Description Factory Default
User-specified date This allows configuration of the local date in
yyyy-mm-dd format.
1970/01/01
Daylight Saving Time
The Daylight Saving Time settings are used to automatically offset the PT-G7509’s time forward
according to national standards.
Start Date
Setting Description Factory Default
User-specified date Specifies the date that Daylight Savings Time
begins.
None
End Date
Setting Description Factory Default
User-specified date Specifies the date that Daylight Savings Time
ends.
None
Offset
Setting Description Factory Default
User-specified hour Specifies the number of hours that the time
should be offset forward during Daylight
Savings Time.
None
System Up Time
This indicates how long the PT-G7509 remained up since the last cold start. The up time is
indicated in seconds.
Time Zone
Setting Description Factory Default
Time zone Specifies the time zone, which is used to
determine the local time offset from GMT
(Greenwich Mean Time).
GMT (Greenwich
Mean Time)
NOTE
Changing the time zone will automatically correct the current time. Make sure to set the time
zone before setting the time.