User`s manual

PT-G7509 User’s Manual Featured Functions
3-8
Switch IP Address
Setting Description Factory Default
IP address for the
PT-G7509
Assigns the PT-G7509’s IP address on a
TCP/IP network.
192.168.127.253
Switch Subnet Mask
Setting Description Factory Default
Subnet mask for the
PT-G7509
This identifies the type of network to which the
PT-G7509 is connected (e.g., 255.255.0.0 for a
Class B network, or 255.255.255.0 for a Class
C network).
255.255.255.0
Default Gateway
Setting Description Factory Default
IP address for gateway Specifies the IP address of the router that
connects the LAN to an outside network.
None
DNS IP Address
Setting Description Factory Default
IP address for DNS server Specifies the IP address of the DNS server used
by your network. After specifying the DNS
server’s IP address, you can use the
PT-G7509’s URL (e.g.,
www.PT.company.com) to open the web
console i
nstead of entering the IP address.
None
IP address for 2nd DNS
server
Specifies the IP address of the secondary DNS
server used by your network. The PT-G7509
will use the secondary DNS server if the first
DNS server fails to connect.
None
IPv6
Global Unicast Address Prefix (Prefix Length: 64 bits)
Setting Description Factory Default
Global Unicast Address
Prefix
The prefix value must be formatted according
to RFC 2373 “IPv6 Addressing Architecture,”
using 8 colon-separated 16-bit hexadecimal
values. One double colon may be used in the
address to indicate the appropriate number of
zeros required to fill the undefined fields.
None