User`s manual
3
3
Chapter 3 Featured Functions
This chapter explains how to access the PT-G7509’s various configuration, monitoring, and
administration functions. These functions can be accessed by serial, Telnet, or web console. The
serial console can be used if you do not know the PT-G7509’s IP address and requires that you
connect the PT-G7509 to a PC COM port. The Telnet and web consoles can be opened over an
Ethernet LAN or the Internet.
The web console is the most user-friendly way to configure the PT-G7509. In this chapter, we use
the web console interface to introduce the functions. There are only a few differences between the
web console, serial console, and Telnet console.
The following topics are covered in this chapter:
Configuring Basic Settings
Using Port Trunking
Configuring SNMP
Using Communication Redundancy
Using Traffic Prioritization
Using Virtual LAN
Using Multicast Filtering
Using Bandwidth Management
Using Port Access Control
Using Auto Warning
Using Line-Swap-Fast-Recovery
Using Set Device IP
Using Diagnosis
Using Monitor
Using the MAC Address Table
Using Event Log
Using Syslog