User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Featured Functions
- Configuring Basic Settings
- Using Port Trunking
- Configuring SNMP
- Using Communication Redundancy
- Using Traffic Prioritization
- Using Virtual LAN
- Using Multicast Filtering
- Using Bandwidth Management
- Using Port Access Control
- Using IP Filter
- Using Auto Warning
- Using Line-Swap-Fast-Recovery
- Using Set Device IP
- Using Diagnosis
- LLDP
- Using Monitor
- Using the MAC Address Table
- Using System Log
- Using HTTPS/SSL
- A. MIB Groups
- B. Specifications
- C. Modbus/TCP Map
PT-7728 User’s Manual Featured Functions
3-80
The PT-7728 also provides a private MIB file, located in the file Moxa-PT7728-MIB.my on the
PT-7728 utility CD-ROM.
Public Traps
y Cold Start
y Link Up
y Link Down
y Authentication Failure
y dot1dBridge New Root
y dot1dBridge Topology Changed
Private Traps
y Configuration Changed
y Power On
y Power Off
y Traffic Overloaded
y Turbo Ring Topology Changed
y Turbo Ring Coupling Port Changed
y Turbo Ring Master Mismatch