User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Featured Functions
- Configuring Basic Settings
- Using Port Trunking
- Configuring SNMP
- Using Communication Redundancy
- Using Traffic Prioritization
- Using Virtual LAN
- Using Multicast Filtering
- Using Bandwidth Management
- Using Port Access Control
- Using IP Filter
- Using Auto Warning
- Using Line-Swap-Fast-Recovery
- Using Set Device IP
- Using Diagnosis
- LLDP
- Using Monitor
- Using the MAC Address Table
- Using System Log
- Using HTTPS/SSL
- A. MIB Groups
- B. Specifications
- C. Modbus/TCP Map
PT-7728 User’s Manual Featured Functions
3-14
Log Files Path and Name
Setting Description Factory Default
Max. 40 characters This specifies the path and file name of the
PT-7728’s log file.
None
After setting the desired paths and file names, click Activate to save the setting. Click Download
to download the prepared file from the remote TFTP server, or click Upload to upload the desired
file to the remote TFTP server.
System File Update—By Local Import/Export
Configuration File
Click Export to save the PT-7728's configuration file to the local host.
Log File
Click Export to save the PT-7728's log file to the local host.
NOTE
Some operating systems will open the configuration file and log file directly in the web page. In
such cases, right click the Export button to save the file.
Upgrade Firmware
To import a new firmware file onto the PT-7728, click Browse to select the firmware file that is
saved on your computer. The upgrade procedure will proceed automatically after clicking Import.
Upload Configure Data
To import a configuration file onto the PT-7728, click Browse to select the configuration file
already saved on your computer. The upgrade procedure will proceed automatically after clicking
Import.