User`s manual

PT-7324 Series User’s Manual Getting Started
7. Press 1 to modify the PT-7324’s network parameters, or press 2 to reset the PT switch’s
configuration to the factory defaults.
Configuration Using a Web Browser
The PT-7324’s web browser interface provides a convenient way to modify the switch’s
configuration and access the built-in monitoring and network administration functions. The
recommended web browser is Microsoft Internet Explorer 5.5 or 6.0 with JVM (Java Virtual
Machine) installed.
NOTE
To use the PT-7324’s management and monitoring functions from a PC host connected to the
same LAN as the PT-7324, you must make sure that the PC host and the PT-7324 are on the same
logical sub network.
NOTE
Before accessing the PT-7324’s web browser interface, first connect one of the PT-7324’s RJ45
Ethernet ports to your Ethernet LAN, or directly to your PC’s Ethernet NIC. You can establish a
connection with either a straight-through or cross-over Ethernet cable. If you have difficulty
connecting, refer to the Auto MDI/MDI-X Connection section from the Hardware installation
Guide for more information about the different types of Ethernet cables and ports.
NOTE
The PT-7324’s default IP is 192.168.127.253.
Perform the following steps to access the PT-7324’s web browser interface.
1. Open Internet Explorer and type the PT-7324’s IP address in the Address field. Press Enter
to establish the connection.
2. The web login page will be displayed. Select the login account (Admin or User) and enter the
Password (this is the same as the Console password), and then click Login to continue. Leave
the Password field blank if a password has not been set.
2-4