User`s manual

2
2
Chapter 2 Getting Started
In this chapter, we explain how to access your Moxa PowerTrans Switch for the first time. There
are two ways to access the switch: by serial console or web browser. The serial console connection
method, which requires using a short serial cable to connect the switch to a PC’s COM port, can be
used if you do not know the switch’s IP address. The web browser connection method can be used
to access Moxa PowerTrans Switches over an Ethernet LAN, or over the Internet.
The following topics are covered:
 RS-232 Console Configuration (115200, None, 8, 1, VT100)
 Configuration Using a Web Browser