User`s manual

A
A
Appendix A Specifications
Technology
Standards IEEE802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1p
Flow control IEEE802.3x flow control, back pressure flow control
Interface
Fast Ethernet 10/100BaseT(X) or 100BaseFX (SC/ST connector)
Gigabit Ethernet 10/100/1000BaseT(X), 1000BaseSX/LX/LHX/ZX (SFP
slot, LC connector)
System LED Indicators STAT, PWR1, PWR2, FAULT
Module LED Indicators LNK/ACT, FDX/HDX, SPEED
Alarm Contact One relay outputs with current carrying capacity of 3A @
30VDC or 3A @ 240VAC
Optical Fiber (100BaseFX)
Distance Multi mode
0 to 5 km, 1300 nm (50/125μm, 800 MHz*km)
0 to 4 km, 1300 nm (62.5/125μm, 500 MHz*km)
Single mode
0 to 40 km, 1310 nm (9/125μm, 3.5 PS/(nm*km))
Min. TX Output Multi mode: -20 dBm; Single mode: -5 dbm
Max. TX Output Multi mode: -10 dBm; Single mode: 0 dbm
RX Sensitivity -36 to -32 dBm (Single), -34 to -30 dBm (Multi)
Power
Input Voltage Low Voltage:
24/48 VDC (9 to 60V)
High Voltage:
110/250 VDC (88 to 300V) and
100/240 VAC (85 to 264V)
Input Current Max. 0.68A @ 24 VDC
Max. 0.35A @ 48 VDC
Max. 0.17/0.11A @ 110/220 VDC
Max. 0.33/0.23A @ 110/220 VAC
Connection 10-pin Terminal Block
Overload Current Protection 6.3 A
Reverse Polarity Protection Present
Mechanical
Casing IP 30 protection, metal case
Dimensions
(W x H x D)
440 x 44 x 254 mm (17.32 x 1.73 x 10.00 in.)
Weight 4700g
Installation 19-inch rack mounting