User`s manual

PT-7324 Series User’s Manual Configurator GUI
4. Click Yes in response to the following warning message to accept the new settings.
Unlock Server
The Unlock Server function is used to open a password protected switch so that the user can
modify its configuration, import/export a configuration, etc. There are six possible responses under
the Status column. The Status of a Moxa PowerTrans Switch indicates how the switch was
located (by Moxa PowerTrans Switch Configurator), and what type of password protection it has.
The six options are as follows (note that the term Fixed is borrowed from the standard fixed IP
address networking terminology):
y Locked
The switch is password protected, Broadcast Search was used to locate it, and the password
has not yet been entered from within the current Configurator session.
y Unlocked
The switch is password protected, Broadcast Search was used to locate it, and the password
has been entered from within the current Configurator session. Henceforth during this
Configurator session, activating various utilities for this switch will not require re-entering the
server password.
y Blank
The PT-7324 is not password protected, and Broadcast Search was used to locate it.
Perform the following steps to unlock a locked PT-7324 (i.e., a Moxa PowerTrans Switch with
Status “Locked” or “Locked Fixed”). Highlight the server (from the Moxa PowerTrans Switch list
in the Configurator window’s left pane), and then click the Unlock toolbar icon
, or select
Unlock from the Configuration menu.
4-6