User`s manual

PT-7324 Series User’s Manual Featured Functions
Configuring Relay Warning
The Auto Relay Warning function uses relay output to alert the user when certain user-configured
events take place. There are two basic steps required to set up the Relay Warning function:
1. Configuring Relay Event Types
Select the desired Event types from the Web Browser Event type page (a description of each
event type is given later in the Relay Warning Events setting subsection).
2. Activate your settings
After configuring, you will need to activate your PT-7324’s Relay Event Types.
Relay Warning Events Settings
Event Types
Event Types can be divided into two basic groups: System Events and Port Events. System
Events are related to the overall function of the switch, whereas Port Events are related to the
activity of a specific port.
The PT-7324 supports one relay output. You can configure which relay output is related to which
events. This helps administrators identify the importance of the different events.
System Event Warning Relay output is triggered when…
Power Transition (OnÆOff) PT-7324 is powered up.
Power Transition (OffÆOn) PT-7324 is powered down.
3-15