Installation guide

2-2
LED Indicators
LED COLOR Description
Power Red
Indicates that NPort Server Pro is turned on, and
power is being supplied to the server.
Green
Steady on indicates that NPort Server Pro is
running without problem. Flashing indicates that
the NPort Pro Manager Locate Server function
has located the server.
Ready
Blinking
NPort is requesting an IP address from the
DHCP or BootP server. After receiving the IP,
the LED will stop blinking.
100M Green
Steady on indicates that NPort Server Pro’s
Ethernet connection is running at 100 Mbps.
10M Green
Steady on indicates that NPort Server Pro’s
Ethernet connection is running at 10 Mbps.
Traffic Green
Blinking indicates data are being received from
the Ethernet Interface.
Tx Green
Blinking indicates that data are being sent out
through the serial port.
Rx Orange
Blinking indicates that data are being received
through the serial port.
Note: The number of Tx/Rx LEDs depends on the model you use. For DE-303,
there are 16 Tx/Rx LEDs. For DE-308, there are 8 Tx/Rx LEDs.