User`s manual

CN2510 User’s Manual Introduction
1-2
Product Features
Hardware
y 1 LAN port (auto-detecting 10/100 Mbps Ethernet)
y Surge protection for each serial port
y 4 MB RAM, 2 MB Flash ROM
y Tx/Rx LED for each serial port
y System Status LEDs
y Ethernet Status LEDs
y 8 or 16 RJ45 RS-232 serial ports, with up to 921.6 Kbps transmission speed
Software
y ASCII/Binary terminal modes with up to 8 Telnet and Rlogin sessions
y Point to Point Protocol (PPP and PPPD)
y Serial Line Internet Protocols (SLIP and SLIPD)
y Dynamic auto-recognition of Terminal, SLIP, or PPP
y Dial-on-demand, Dial-out
y Remote serial or parallel printing (RLP)
y CN2510 Async Server Proprietary Protocol (ASPP) for TCP/IP socket programming
y RAW mode for transparent data transmission
y Reverse Telnet
y SNMP Agent for network management
y Network protocols: TCP/IP, UDP, ICMP, NetBEUI, DHCP
y Application protocols: Telnet, Rlogin, Rtelnet, RAW TCP, RAW UDP, RCP, WINS, LPD,
DNS, Multi-Host
y Security protocols: RADIUS, Dial-back, PAP, CHAP, Local user/password
y Real COM port driver for Windows 95/98/ME/NT/2000/XP/2003
y Fixed TTY: SCO Open Server5, SCO UnixWare 7, Linux 2.2.x, Linux 2.4.x, Linux 2.6.x
y Static Routing, RIP I/II protocols
y Windows-like administrative CONSOLE utility from a fixed console port, or by Telnet from a
networked host
y Password protection and extensive user verification functions
y Easy firmware upgrade via Flash ROM
Package Checklist
CN2510 Async Server products are shipped with the following items:
y CN2510 Async Server
y AC power Cord (for AC Model only)
y Documentation and Software CD-ROM
y Quick Installation Guide (English and Simplified Chinese versions)
y RJ45 Loopback Tester
y Product Warranty Booklet
y Rackmount Kit (includes 2 brackets and 8 screws)
y Desktop Kit (includes 4 pads)