User`s manual

CN2510 User’s Manual Getting Started
2-14
Domain Name Server in the Domain server 1 IP address field, and the IP address of the
secondary Domain Name Server in the Domain server 2 IP address field. When CN2510
receives a connection request, CN2510 first checks the host table defined on the Host_table
page. If a matching entry cannot be found, CN2510 sends a query to the Domain Name
Server.
WINS function disable—Enable or disable the WINS server. The default setting is “enable.”
WINS server IP address—If a WINS Server is connected to the network, use this field to
record the WINS Server’s IP address. TCP/IP uses IP addresses to identify hosts, but users
often use symbolic names, such as computer names. The WINS (Windows Internet Naming
Service) Server, which uses NetBIOS over TCP/IP, contains a dynamic database to map
computer names to IP addresses.
Console password—If you specify a password, write it down for safe keeping. If you forget
the password, you will need to use the reset password button to reset it. Only use the console
password when absolutely necessary.
NOTE
Write your console password in a safe place before setting the password.
Server Configuration—LAN
1. From the MAIN MENU, use the arrow keys to select Server, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
[Server] Port seTting sAve Utility Restart Exit
Examine/modify async server node/table configuration
Enter: select ESC: previous menu
2. From the SERVER MENU, select Lan, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 SERVER MENU
------------------------------------------------------------------------------
Info. [Lan] Adv. Host_table Route_table User_table Quit
Examine/modify async server basic configuration
Enter: select ESC: previous menu
3. The Lan page contains input/display fields for DHCP (client), Async server IP address,
Async server IP netmask, Default gateway IP address, Ethernet speed, and Ethernet
address. Each item is described in detail below.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
Info. [Lan] Adv. Host_table Route_table User_table Quit
Examine/modify the Ethernet LAN port setting
ESC: back to menu Enter: select
Ethernet LAN port 1:
DHCP (client) [Disable]
Async server IP address [192.168.127.254 ]
Async server IP netmask [255.255.255.0 ]
Default gateway IP address [ ]
Ethernet speed [ ---- ]
Ethernet address [00:90:E8:26:10:09]