User`s manual

CN2510 User’s Manual RADIUS Server
B-4
+------------------------------------------------+
| Enable Detail-setting |
| TERM_BIN mode [yes] [Term parameters] |
| PPPD mode [yes] [PPP parameters] |
| SLIPD mode [yes] [SLIP parameters] |
|------------------------------------------------|
| TERM_BIN mode [none ] |
+------------------------------------------------+
Dialin/out—PPP/PPPD Mode
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
[Mode] Line mOdem Welcome_MSG Quit
Examine/modify the operation mode of async ports
ESC: back to menu Enter: select
Port Application Mode Description/more setting
01 [Dialin/out ] [PPP ] [Point-to-Point Protocol ]
02 [Dialin/out ] [PPP ] [Point-to-Point Protocol ]
03 [Dialin/out ] [PPP ] [Point-to-Point Protocol ]
04 [Dialin/out ] [PPP ] [Point-to-Point Protocol ]
+-----------------------------------------------------+
| Destination IP address : [ ] |
| Source IP address : [ ] |
| IP netmask : [ ] |
| TCP/IP compression : [no ] |
| Inactivity time : [0 ] minutes |
| Link quality report : [no ] |
| Outgoing PAP ID : [ ] |
| PAP password : [ ] |
| Incoming PAP check : [none ] |
+-----------------------------------------------------+
Dialin/out—TERM_BIN / TERM_ASC Mode
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
[Mode] Line mOdem Welcome_MSG Quit
Examine/modify the operation mode of async ports
ESC: back to menu Enter: select
Port Application Mode Description/more setting
01 [Terminal ] [TERM_ASC ] [ASCII Terminal mode (8 sessions)]
02 [Terminal ] [TERM_ASC ] [ASCII Terminal mode (8 sessions)]
03 [Terminal ] [TERM_ASC ] [ASCII Terminal mode (8 sessions)]