User`s manual

CN2510 User’s Manual Administrative Utilities
14-22
Remote RCP Import
As we pointed out earlier, RCP is a file transfer protocol that does not require a password.
1. Login to your UNIX/LINUX host. For example, login to 203.67.8.22 as user john.
2. Create a file named .rhosts in this directory. Enter CN2510’s IP address, e.g., 192.168.205.21,
or CN2510’s domain name (if it’s defined in your /etc/hosts file), in the .rhosts file.
3. Telnet CN2510’s IP address.
4. After accessing CN2510’s MAIN MENU, select seTting Æ Import. In Import via column,
select Network host (using RCP).
5. Enter the UNIX/LINUX host’s IP address for Host name/IP address.
6. Enter CN2510’s firmware file name on the UNIX/LINUX host for File name.
7. Enter the user name required to login to the UNIX/LINUX host for User name.
8. Press CTRL-U to start.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
Export [Import] Default Quit
Import configuration from previously saved file
ESC: back to menu Enter: select
Import via [Network host (using RCP) ]
Host name/IP address [203.67.8.22 ]
File name [/home/john/cn2510.rom ]
User name [john ]
Press CTRL-U to start ...
Default
CN2510 can restore default settings if necessary. Note that the IP address will not be changed to
default.
1. From the MAIN MENU select seTting, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server Port [seTting] sAve Utility Restart Exit
Export or import configuration
Enter: select ESC: previous menu
2. From the SETTING MENU, select Default, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 SETTING MENU
------------------------------------------------------------------------------
Export Import [Default] Quit
Load the factory setting
Enter: select ESC: previous menu