User`s manual

CN2510 User’s Manual Administrative Utilities
14-19
Remote RCP Export
As we pointed out earlier, RCP is a file transfer protocol that does not require a password.
1. Login to your UNIX/LINUX host. For example, login to 203.67.8.22 as user john.
2. Create a file named .rhosts in this directory. Enter CN2510’s IP address, e.g., 192.168.205.21,
or CN2510’s domain name (if it’s defined in your /etc/hosts file), in the .rhosts file.
3. Telnet CN2510’s IP address.
4. After entering CN2510’s MAIN MENU, select setting Æ Export.
5. In the Export via column, select Network host (using RCP).
6. Enter the UNIX/LINUX host’s IP address for Host name/IP address.
7. Enter CN2510’s firmware file name on the UNIX/LINUX host for File name.
8. Enter the user name required to login to the UNIX/LINUX host for User name.
9. Press CTRL-U to start.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
[Export] Import Default Quit
Export current configuration to file
ESC: back to menu Enter: select
Export via [Network host (using RCP) ]
Host name/IP address [203.67.8.22 ]
File name [/home/john/cn2510.rom ]
User name [john ]
Press CTRL-U to start ...
Import
Saved settings can be imported back to the CN2510. There are two settings to choose from for
importing from a file, Console Terminal or Remote RCP.
Console Terminal Import
1. Run Start Æ Programs Æ PComm Terminal Emulator. Follow the steps given earlier to
enter the MAIN MENU.
2. From the MAIN MENU, select seTting, and then press Enter.