User`s manual

CN2510 User’s Manual Getting Started
2-11
8. When the installation is complete, select Start Æ Programs Æ PComm Terminal
Emulator to run PComm Terminal Emulator.
9. Use an RJ45 to DB25 female cable to connect to the CN2510 console port. Start PComm
Terminal, and then click on the left-most icon to open a new connection.
10. Click on the Communication Parameter tab, select the COM port (COM2 in this example)
for console connection, 115200 for Baud Rate, 8 for Data Bits, None for Parity, and 1 for Stop
Bits.