User`s manual
CN2510 User’s Manual Administrative Utilities
14-15
NOTE
The file must contain at least a host, and if the login ID is different on the remote host, it must also
contain the login ID. This sample .rhosts file is for the user john on the host sun. The
following three accounts are considered “equivalent” accounts. The user has accounts on moxa1
and moxa3 with the same login ID, and has an account on moxa2 as johnwu.
# This comment line is ignored by the operating system.
Moxa1.com.tw john
Moxa2.com.tw johnwu
Moxa3.com.tw john.
1. Login to your UNIX/LINUX host. For example, login to 203.67.8.22 as user “john”.
2. Copy the CN2510 firmware file, e.g., “CN2510.rom”, to the current directory.
3. Create a file named .rhosts in this directory. Enter CN2510’s IP address, e.g.,
192.168.205.21, in the .rhosts file, or enter CN2510’s domain name if it’s defined in
your /etc/hosts file.
4. Telnet CN2510’s IP address.
5. After entering CN2510’s MAIN MENU, select Utility Æ Upgrade.
CN2510-8 CN2510-8_5631 V2.0 UTILITY MENU
------------------------------------------------------------------------------
Ping Monitor Diagnostic [Upgrade] Quit
Upgrade operational system program
Enter: select ESC: previous menu
6. In the Upgrade via column, select Network host (using RCP).
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
Ping Monitor Diagnostic [Upgrade] Quit
Upgrade operational system program
ESC: back to menu Enter: select +----------------------------+
| Console port (using XMODEM)|
Upgrade via [Console port (| Network host (using RCP) |
Host name/IP address [ +----------------------------+
File name [ ]
User name [ ]
Press CTRL-U to start ...
7. In Host name/IP address, enter the IP address of the UNIX/LINUX host.
8. In File name, enter the CN2510 firmware file name in the UNIX/LINUX host.
9. In User name, enter the user name for logging into the UNIX/LINUX host.
10. Press CTRL-U to start.
11. After downloading, CN2510 will restart the system.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
Ping Monitor Diagnostic [Upgrade] Quit
Upgrade operational system program
ESC: back to menu Enter: select
Upgrade via [Network host (using RCP) ]
Host name/IP address [203.67.8.22 ]
File name [/home/john/cn2510.rom ]
User name [john ]
Press CTRL-U to start ...