User`s manual

CN2510 User’s Manual Administrative Utilities
14-8
2. If any of these tests fails, contact Moxa to request repair services.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
Ping Monitor [Diagnostic] Upgrade Quit
Loopback test and self-diagnose
ESC: back to menu Enter: select
Asynchronous port controller test... OK.
Asynchronous port loopback test... OK.
Ethernet port controller test... OK.
Ethernet port 1 controller loopback test... OK.
Ethernet port 1 transceiver loopback test... OK.
3. Press Esc to restart the system.
Upgrade
The operating system in CN2510 is kept in the Flash ROM. It can be upgraded using the Windows
Utility, from a locally connected CONSOLE Terminal using XMODEM protocol, or from a Unix
host using RCP protocol.
Upgrading with the Windows Utility
One of the main features provided by the Windows Utility is to upgrade firmware. If the CN2510
is connected to a Windows network, this is the simplest method available for upgrading the
firmware.
1. Run Upgrade.exe from the CN2510 CD.
2. Select the CN2510 server by clicking the
button on the toolbar. If the CN2510 server is
at a remote site, use
to add it to the list.