User`s manual

CN2510 User’s Manual Administrative Utilities
14-3
3. Each item is discussed in the following subsections.
CN2510-8 CN2510-8_5631 V2.0 MONITOR M
E
NU
-------------------------------------------------------------------------------
[Line] Network Async async-Setting Routing PPP-Trace Quit
Monitor asynchronous port connective utilization
Enter: select ESC: previous menu
Line
1. From the MONITOR MENU, select Line, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 MONITOR M
E
NU
-------------------------------------------------------------------------------
[Line] Network Async async-Setting Routing PPP-Trace Quit
Monitor asynchronous port connective utilization
Enter: select ESC: previous menu
2. The Line page shows the status of each port.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
[Line] Network Async async-Setting Routing PPP-Trace Quit
Monitor asynchronous port connective utilization
ESC: back to menu Enter: select
Port Type Idle Status
01 PPP 39Sec negotiation
02 TERM_BIN 39Sec select protocol
03 RTELNET 39Sec listen
04 ASPP 39Sec listen
05 TERM_BIN 39Sec select protocol
06 RAW PRN 39Sec listen
07 FIXTTY 39Sec #S1:listen S2:listen
08 ASPP 39Sec listen
09 RAW UDP 39Sec data transfer
Type The current operation mode of the port (set in PORT MENU Æ Mode).
Idle The amount of time the port has been idle.
Status The current status of the port. (If a host is connected to this port, then the host’s IP
address is displayed in this column.)
3. Press Esc to return to Line.