User`s manual

CN2510 User’s Manual Setting Up Routing
13-5
3. Use the tab and arrow keys to move the cursor to configure Gateway, Destination, Netmask,
and Metric. Each item is described in detail below the figure.
CN2510-8 CN2510-8_5631 V2.0
----------------------------------------------------------------------
Info. Lan Adv. Host_table [Route_table] User_table Quit
Examine/modify the routing table
ESC: back to menu Enter: select
Entry Gateway Destination Netmask Metric
01 [ ] [ ] [ ] [01]
02 [ ] [ ] [ ] [01]
03 [ ] [ ] [ ] [01]
04 [ ] [ ] [ ] [01]
Setting Value Notes Necessity
Entry 01-32 A maximum of 32 entries are allowed. Fixed
Gateway xxx.xxx.xxx.xxx The IP address of the next-hop router. Required
Destination xxx.xxx.xxx.xxx The host IP address or network address of
the route’s destination.
Required
Netmask xxx.xxx.xxx.xxx The destination network’s netmask. Required
Metric 1-15 The number of hops from the source
destination.
Required
4. Press Esc to return to the MAIN MENU.
Static Routing Examples
Configuring Routes to the Internet
CN2510
Console Server
TCP/IP
Router
PC Notebook
Modem
Ethernet
203.67.6
203.67.6.1
203.67.6.254
203.67.6.253
Modem
UNIX
Server
Rx
Tx
12
3
4 5 6 7 8 9 10 11 12 13 14 15 16
Reset
Ready
SELMENU
CN2510
16 port RS-232 Async Server
Internet
PC