User`s manual

CN2510 User’s Manual Setting Up Routing
13-4
3. Use the Up/Down arrow keys to move the cursor to the Routing protocol pop-up selector.
Press Enter to see the options. Select RIP-1 or RIP-2. The RIP setting is only for sending
packets. For receiving packets, CN2510 supports both RIP-1 and RIP-2.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
Info. Lan [Adv.] Host_table Route_table User_table Quit
Examine/modify async server advance configuration
ESC: back to menu Enter: select
RADIUS server IP [ ]
RADIUS key [ ]
UDP port <1:1645 2:1812> [1]
Enable RADIUS accounting [no ]
SNMP community name [public ]
SNMP trap server IP address [ ]
+-------+
Ethernet IP forwarding [no ] | None |
Routing protocol [None ] | RIP-1 |
| RIP-2 |
TCP retransmission timeout [ ]+-------+: 50 – 60000 ms)
SIO data transfer timeout [ ] (range: 0 – 1000 ms)
4. Press Esc to return to the MAIN MENU.
Configuring the Static Routing Table
Although RIP-1 and RIP-2 periodically update routing tables between different routers, you still
need to add routing entries in the routing table for routes only directed to you.
Open Server Menu Æ Route_table to configure the static routing table.
1. From the MAIN MENU, select Server, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
[Server] Port seTting sAve Utility Restart Exit
Examine/modify async server node/table configuration
Enter: select ESC: previous menu
2. From the SERVER MENU, select Route_table and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 SERVER MENU
------------------------------------------------------------------------------
Info. Lan Adv. Host_table [Route_table] User_table Quit
Examine/modify the routing table
Enter: select ESC: previous menu