User`s manual

CN2510 User’s Manual Setting Up Multiplexor
12-13
You may also save all settings from the MAIN MENU by selecting sAve and then pressing Enter.
Press Enter again to save, and any other key to cancel.
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server Port seTting [sAve] Utility Restart Exit
Save current configuration to Flash ROM
ESC: back to menu Enter: select
+-------------------------------------+
|Enter to updated, other key to cancel|
+-------------------------------------+
Restart
1. From the MAIN MENU, select Restart.
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server Port seTting sAve Utility [Restart] Exit
Restart the whole system or selected async ports
Enter: select ESC: previous menu
2. Select System and then press Enter to restart the system and terminate the Telnet session.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
[System] Port Quit
Restart the Async Server
ESC: back to menu Enter: select
+--------------------------------------------------------------------+
| Warning !!! |
| Restart system will disconnect all ports and clear all status value |
| ‘ Enter: continue ESC: cancel |
+--------------------------------------------------------------------+