User`s manual

CN2510 User’s Manual Setting Up Multiplexor
12-11
Setting Value Notes Necessity
TCP alive check
time
0-99 minutes The time period CN2510 waits before
checking if the TCP connection is alive
or not. If no response is received,
CN2510 will reset the port and terminate
the connection.
Optional
11. Repeat the previous steps for ports 5, 7, and 8.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
[Mode] Line mOdem Welcome_MSG Quit
Examine/modify the operation mode of async ports
ESC: back to menu Enter: select
Port Application Mode Description/more setting
01 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
02 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
03 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
04 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
05 [Multiplex ] [TERM_BIN] [Binary Terminal mode (1 session) ]
06 [Multiplex ] [TERM_BIN] [Binary Terminal mode (1 session) ]
07 [Multiplex ] [TERM_BIN] [Binary Terminal mode (1 session) ]
08 [Multiplex ] [TERM_BIN] [Binary Terminal mode (1 session) ]
Configuring the Serial Ports
Open Port Menu Æ Line to configure serial port settings.
1. From the MAIN MENU, select Port, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server [Port] seTting sAve Utility Restart Exit
Examine/modify async server ports configuration
Enter: select ESC: previous menu
2. From the PORT MENU, select Line, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 PORT MENU
------------------------------------------------------------------------------
Mode [Line] mOdem Welcome_MSG Quit
Examine/modify asynchronous port configuration
Enter: select ESC: previous menu