User`s manual

1
1
2
2
Chapter 12 Setting Up Multiplex
In this chapter, we describe how to configure Moxa CN2510 as a Multiplexor and De-Multiplexor.
Using the Multiplexor/De-Multiplexor application requires two Async Servers—one attached to a
host with a multi-port serial board and several serial lines, and the other connected to external
devices. In this way, the original host can use a TCP/IP connection to control serial devices from a
remote location.
The following topics are covered in this chapter:
 Accessing the Console Utility
 Selecting the Application
 Configuring the “Host” CN2510
 Configuring the “Device” CN2510
 Configuring the Serial Ports
 Save
 Restart