User`s manual

CN2510 User’s Manual Setting Up Printer
11-5
3. Move the cursor to the Description/more setting column, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
[Mode] Line mOdem Welcome_MSG Quit
Examine/modify the operation mode of async ports
ESC: back to menu Enter: select
Port Application Mode Description/more setting
01 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
02 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
03 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
04 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
05 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
06 [Printer ] [RAW PRN ] [Raw serial port printer mode ]
07 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
4. The pop-up selector contains input/display fields for Group, TCP Pcort number, and TCP
alive check time. Each item is described in detail below the figure.
+------------------------------------------+
| Group : [Group01] |
| TCP port number : [2048] |
| TCP alive check time: [0 ] minutes |
+------------------------------------------+
Setting Value Notes Necessity
Group Group 01-16 Groups printers attached to different ports.
Printers in the same group will share the
printing load for printing requests to that group
of printers. E.g., setting CN2510’s serial ports
1, 3, and 6 for Group01 will allow the printers
attached to these three ports to act essentially
as one printer.
Optional
TCP port
number
2048-2063
The host uses this value to determine which
Group the printer attached to this serial port
belongs to. These values are fixed, and cannot
be changed by the user.
Group TCP Port No.
01 2048
02 2049
03 2050
... ...
16 2063
Fixed
TCP alive
check time
0-99 minutes The time period CN2510 waits before
checking if the TCP connection is alive or not.
If no response is received, CN2510 will reset
the port and terminate the connection.
Optional
5. Press Esc to return to the PORT MENU.