User`s manual

CN2510 User’s Manual Getting Started
2-5
NOTE
If your network is already set up, telnet over the network to CN2510’s IP address to access the
Console Utility. If your network environment is not set up, use Moxa PComm Terminal to
establish a direct serial console connection.
Configuration Checklist
You will need the following information to configure CN2510. Check with your network
administrator if you do not know all of the required information.
Basic CN2510 Information:
Name
Location
LAN1 IP address
LAN1 IP netmask
LAN1 default gateway IP address
Domain server 1 IP address
Domain server 2 IP address
WINS server IP address
Console password
Accessing the Console from a Telnet Terminal
Connect CN2510 to your LAN and then turn on the power. Use the Moxa Windows Utility to find
CN2510’s IP address, and then telnet to the IP address to enter the CN2510 console.
CN2510 Windows Utility
The CN2510 Utility is a convenient Windows utility that can be used to find both the name and IP
address of your CN2510. Once you know the IP address, you can telnet CN2510 over the network
to complete the configuration process and to gather information about all servers on the network.
1. Run upgrade.exe, located in the \Software\Firmware\ folder on the CN2510 Documentation
and Software CD, or run NPort Tool Æ Firmware Utility from the Start menu.
2. The CN2510 Utility will search for all CN2510s on the network.