User`s manual

CN2510 User’s Manual Setting Up Dial-in/Out
10-15
Setting Value Notes
Enable yes/no Enable modem settings
Initialize String Set the modem initial string.
E.g., AT&S0 =1 for auto-answer.
Dial Up String Dial-up AT command
Phone Number Number Set the number you use to dial out
NOTE
The Dial Up and Phone Number settings are only valid under PPP/SLIP mode.
4. Press Esc to return to the PORT MENU.
Optional Welcome Message
Open Port Menu Æ Welcome_MSG to set up a welcome message to greet dial-in users.
1. From the MAIN MENU, use the arrow keys to select Port, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server [Port] seTting sAve Utility Restart Exit
Examine/modify async server ports configuration
Enter: select ESC: previous menu
2. From the PORT MENU, select Welcome_MSG, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
Mode Line mOdem [Welcome_MSG] Quit
Edit the hello message for Terminal port
ESC: back to menu Enter: select +-----+
| no |
vvvvvvvvvvvvvvvvvvvvvvvvvvvEnable hello message : [ no | yes |vvvvvvvvvvvv
<<< Moxa Async Server >>> +-----+
3. Select yes to edit the welcome message.
4. Press Esc to return to the PORT MENU.
Configuring Optional Local User Information
Open Server Menu Æ User_Table, to configure local user authentication information. If you set
Incoming PAP check or Authentication type as Local instead of Server, you will need to
configure the User_table for user authentication. The User_table page is also used to activate the
call-back function.
1. From the MAIN MENU, use the arrow keys to select Server, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
[Server] Port seTting sAve Utility Restart Exit
Examine/modify async server node/table configuration
Enter: select ESC: previous menu