User`s manual

CN2510 User’s Manual Setting Up Dial-in/Out
10-14
Setting Value Notes
RTS/CTS Yes, No Hardware Flow Control
XON/XOFF Yes, No Software Flow Control
None DSR off or DCD off will not be
interpreted as a disconnection.
DSR off DSR off will be interpreted as a
disconnection.
Discon. Ctrl
DCD off DCD off will be interpreted as a
disconnection.
4. Press ESC to return to the PORT MENU.
Configuring Modem Initialization
Open Port Menu Æ Modem to configure modem dial-out initialization and dial-out phone
numbers.
1. From the MAIN MENU, use the arrow keys to select Port, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server [Port] seTting sAve Utility Restart Exit
Examine/modify async server ports configuration
Enter: select ESC: previous menu
2. From the PORT MENU, select mOdem, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 PORT MENU
------------------------------------------------------------------------------
Mode Line [mOdem] Welcome_MSG Quit
Modem initialization and dial-out setting
Enter: select ESC: previous menu
3. The Modem page has input/display fields for Enable, Initialize, Dialup, and Phone number
for each serial port. Each item is described in detail below the figure.
CN2510-8 CN2510-8_5631 V2.0 PORT MENU
------------------------------------------------------------------------------
Mode Line [mOdem] Welcome_MSG Quit
Modem initialization and dial-out setting
ESC: back to menu Enter: select
+-----+
Port Enabl| no |ialize Dial Up Phone Number
01 [yes]| yes | ] [ATD ] [ ]
02 [no ]+-----+ ] [ATD ] [ ]
03 [no ] [AT ] [ATD ] [ ]
04 [no ] [AT ] [ATD ] [ ]
05 [no ] [AT ] [ATD ] [ ]
06 [no ] [AT ] [ATD ] [ ]
07 [no ] [AT ] [ATD ] [ ]
08 [no ] [AT ] [ATD ] [ ]