User`s manual

CN2510 User’s Manual Setting Up Dial-in/Out
10-11
Setting Value Notes Necessity
Password prompt assword: Send Password information when this
prompt is received
Optional
Login user name Login ID Optional
Login password Login Password Optional
Terminal type ansi Terminal type for outgoing connection Optional
Inactivity time 0-99 minutes Idle time before the port is disconnected
automatically. If set to 0 minutes, the
port will not disconnect.
Optional
Authentication
type
None/local/
server
None: Authentication is not required.
local: Check the ID stored in the
User_table (defined under the SERVER
MENU).
Server: Check the ID with the
external RADIUS server. Refer to
Appendix C for RADIUS installation
information.
Optional
TCP alive check
time
0-99 minutes The time period CN2510 waits before
checking if the TCP connection is alive
or not. If no response is received,
CN2510 will reset the port and terminate
the connection.
Optional
7. To configure the PPPD mode parameters, move the cursor to the Detail setting column to
highlight PPP parameters, and then press Enter.
+-----------------------------------------------------+
| Enable Detail setting |
| TERM_BIN mode [yes] [Term parameters ] |
| PPPD mode [yes] [PPP parameters ] |
| SLIPD mode [yes] [SLIP parameters ] |
|---------------------------------------------------- |
| Authentication type [none ] |
+-----------------------------------------------------+
8. The pop-up selector contains input/display fields for Destination IP addr, Source IP address,
IP netmask, TCP/IP compression, Inactivity time, Link quality report, Outgoing PAP ID,
and, PAP password. Each item is described in detail below the figure.
+-----------------------------------------------------+
| Destination IP address : [ ] |
| Source IP address : [ ] |
| IP netmask : [ ] |
| TCP/IP compression : [no ] |
| Inactivity time : [0 ] minutes |
| Link quality report : [no ] |
| Outgoing PAP ID : [ ] |
| PAP password : [ ] |
+-----------------------------------------------------+
Setting Value Notes Necessity
Destination IP
addr
IP address for the
remote Dial-in /
Dial-out user
You need to assign an IP address for the
remote user.
Required