User`s manual

CN2510 User’s Manual Setting Up Dial-in/Out
10-10
6. The pop-up selector contains input/display fields for Quit key, Auto-link protocol, Link by
input IP, Auto-login prompt, Terminal type, Inactivity time, Authentication type, and
TCP alive check time. Each item is described in detail below the figure.
+------------------------------------------------+
| Quit key : [^E] |
| Auto-link protocol : [none ] |
| Telnet TCP port : [23 ] |
| Primary host IP : [ ] |
| Link by input IP : [Disable] |
| Secondary host IP : [ ] |
| Auto-login prompt : [ogin: ] |
| Password prompt : [assword: ] |
| Login user name : [ ] |
| Login password : [ ] |
| Terminal type : [ansi ] |
| Inactivity time : [0 ] minutes |
| Authentication type : [none ] |
| TCP alive check time : [0 ] minutes |
+------------------------------------------------+
Setting Value Notes Necessity
Quit Key ^E Defines the Quit key used to disconnect
the link between the current terminal
session and the remote host. It may be
left blank for binary communication.
Optional
Auto-link protocol None/Telnet/
Rlogin
None: Do not connect to the host
automatically.
Telnet: Connects to the host
automatically by Telnet.
Rlogin: Connects to the host
automatically by Rlogin.
Optional
Telnet TCP port 23 By default, the Telnet TCP port number
is set to 23, which is the default TCP port
number for Telnet. If you need to telnet
to this CN2510 serial port, set the Telnet
TCP port to a different number. We
recommend using 4001, 4002, etc. for
ports 1, 2, etc. to avoid conflicts with
other ports.
Optional
Primary host IP IP address or
the name
defined in the
[Host] table
If specified, designates a ‘permanent’
host to which the terminal will always be
connected.
Optional
Link by input IP Enable/
Disable
For users to enter the connection IP
address manually.
Optional
Secondary host IP IP address or
the name
defined in the
[Host] table.
If specified, designates a secondary
‘permanent’ host to which the terminal
will be connected.
Optional
Auto-login prompt ogin: Send ID information when this prompt is
received.
Optional