User`s manual

CN2510 User’s Manual Setting Up Dial-in/Out
10-4
5. The Dialin/out application supports five operation modes: DYNAMIC, PPP, PPPD, SLIP,
SLIPD. DYNAMIC mode is selected by default.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
[Mode] Line mOdem Welcome_MSG Quit
Examine/modify the operation mode of async ports
ESC: back to menu Enter: select
Port Application Mode Description/more setting
01 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
02 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
03 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
04 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
05 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
06 [Dialin/out ] [DYNAMIC ] [Auto Term/SLIP/PPP identification]
07 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
08 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
Configuring PPPD/PPP Mode
PPPD (PPP on demand) is used for dial-in services, since it provides PPP services only when
receiving a request from a remote PC. PPP provides standard PPP services for both dial-in and
dial-out.
1. Move the cursor to the Mode column for the port and then press Enter.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
[Mode] Line mOdem Welcome_MSG Quit
Examine/modify the operation mode of async ports
ESC: back to menu Enter: select
Port Application Mode Description/more setting
01 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
02 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
03 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
04 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
05 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
06 [Dialin/out ] [DYNAMIC ] [Auto Term/SLIP/PPP identification]
07 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
08 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
2. Select PPPD for dial-in services only, or PPP for both dial-in/out services.
CN2510-8 CN2510-8_5631 V2.0
------------------------------------------------------------------------------
[Mode] Line mOdem Welcome_MSG Quit
Examine/modify the operation mode of async ports
ESC: back to menu Enter: select
+----------+
Port Application Mode | DYNAMIC |on/more setting
01 [NT Real COM ] [ASPP ]| PPP |rver Proprietary Protocol]
02 [NT Real COM ] [ASPP ]| PPPD |rver Proprietary Protocol]
03 [NT Real COM ] [ASPP ]| SLIP |rver Proprietary Protocol]
04 [NT Real COM ] [ASPP ]| SLIPD |rver Proprietary Protocol]
05 [NT Real COM ] [ASPP ]+----------+rver Proprietary Protocol]
06 [Dialin/out ] [DYNAMIC ] [Auto Term/SLIP/PPP identification]
07 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]
08 [NT Real COM ] [ASPP ] [Async Server Proprietary Protocol]