User`s manual

CN2510 User’s Manual Setting Up Multi-Host TTY
9-5
Setting Value Notes Necessity
Max. Sessions 1-8 Select the maximum number of
simultaneous sessions that will be
allowed for this serial port.
Optional
Terminal mode no. Star NT-560+,
NL-5000A,
VT100
CN2510 provides 3 modes that
depend on the connection mode
supported by the terminal.
Optional
Inactivity time 0-99 minutes Idle time before the port is
disconnected automatically. If set to
0 minutes, the port will not
disconnect.
Optional
TCP alive check
time
0-99 minutes The time period CN2510 waits
before checking if the TCP
connection is alive or not. If no
response is received, CN2510 will
reset the port and terminate the
connection.
Optional
Session
Hot Key
TCP port
Remote IP
Configure the Hot key, TCP port,
and Remote IP address for each
session.
3. Press Esc to return to the PORT MENU.
Configuring the Serial Ports
Open Port Menu Æ Line to configure serial port settings.
1. From the MAIN MENU, select Port, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server [Port] seTting sAve Utility Restart Exit
Examine/modify async server ports configuration
Enter: select ESC: previous menu
2. From the PORT MENU, select Line, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 PORT MENU
------------------------------------------------------------------------------
Mode [Line] mOdem Welcome_MSG Quit
Examine/modify asynchronous port configuration
Enter: select ESC: previous menu