User`s manual

CN2510 User’s Manual Setting Up Terminal
8-9
Setting Value Notes Necessity
Login user name Login ID Optional
Login password Login Password Optional
Terminal type ansi Terminal type for outgoing connection Optional
Inactivity time 0-99 minutes Idle time before the port is disconnected
automatically. If set to 0 minutes, the
port will not disconnect.
Optional
Authentication
type
None/local/
server
None: Authentication is not required.
local: Check the ID stored in the
User_table (defined under the SERVER
MENU).
Server: Check the ID with the
external RADIUS server. Refer to
Appendix C for RADIUS installation
information.
Optional
TCP alive check
time
0-99 minutes The time period CN2510 waits before
checking if the TCP connection is alive
or not. If no response is received,
CN2510 will reset the port and terminate
the connection.
Optional
5. Press Esc to return to the PORT MENU.
Configuring the Serial Ports
Open Port Menu Æ Line to configure serial port settings.
1. From the MAIN MENU, select Port, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 MAIN MENU
------------------------------------------------------------------------------
Server [Port] seTting sAve Utility Restart Exit
Examine/modify async server ports configuration
Enter: select ESC: previous menu
2. From the PORT MENU, select Line, and then press Enter.
CN2510-8 CN2510-8_5631 V2.0 PORT MENU
------------------------------------------------------------------------------
Mode [Line] mOdem Welcome_MSG Quit
Examine/modify asynchronous port configuration
Enter: select ESC: previous menu