User`s manual

CN2510 User’s Manual Getting Started
2-2
Hardware Installation
Desktop
Place your CN2510 on a clean, flat, well-ventilated desktop. For better ventilation, attach the 4
pads from the desktop kit to the bottom of the unit, and leave some space between the CN2510 and
other equipment. Do not place equipment or objects on top of the unit, as this might damage the
server.
Bottom of CN2510
Pad
s
Rackmount
CN2510 is designed to be mounted on a standard 19-inch rack. Use the enclosed pair of L-shaped
metal brackets and screws to fasten your CN2510 to the rack cabinet. Each L-shaped bracket has 6
holes, leaving two outer or inner holes available for other uses. You have two options. You can
lock either the front or rear panel of the CN2510 to the front of the rack. Locking the front panel is
shown in the following figure.
Rackmount rail
L-Shaped Metal Bracket
Screws
12345678
Serial ports
Console LAN
Rx
Tx
12345678
Reset
Ready
SELMENU
CN2510
8 port RS-232 Async Server