User`s manual

NPort Server User’s Manual
4-6
2. Click Next to continue. For first-time installer, you will jump to Next step
directly. If the server being set with password, you will see a Password
Protected screen. If you are a server administrator, select ‘ Yes’ and enter the
password. However if you’ re a general user, select ‘ No’ and continue to
install ports.
. Note: If you’re not the administrator, be sure to ask the administrator to add you
to the access control list of the server before accessing the ports.
3. Confirm if the IP address suggested is the one you need. Or, you may key in
a dedicated one assigned by your LAN administrator.
. Note: If you have DHCP server at local network, be sure to consult with the
DHCP administrator to assign dedicated IP addresses to the server and
your computers connecting to the server.