User`s manual

follows we refer to the screen shown below as the Telnet Console In-
terface MAIN MENU.
Navigating the Telnet Console
After activating the Telnet Console, you will need to use the keyboard
keys to maneuver about the vt100 screen. The operation is really quite
simple.
q While in the MAIN MENU, the left/right arrow keys move the
cursor between menu headings, and pressing the Enter key
activates whichever menu heading is highlighted.
q After pressing Enter from the MAIN MENU, the Tab key and
up/down arrow keys are used to move between configurable
options.
The left/right arrow keys are used to “move through” certain
configurable settings without actually changing anything. To
modify a setting, such as a device name or IP address, both of
which have a very large number of possible settings, use the
appropriate letter and number keys on the keyboard.
The Enter key is used to open a menu containing a small number
of options (Yes and No, for example) for configurable settings
which have only two or three possible settings. The up/down
arrow keys move the cursor between the options, and the Enter
key is used to select the option that is highlighted.
q The Esc key is used to maneuver backwards. For example, if you
have made modifications to the settings listed under the
serverConfig menu, press the Esc key to return to the MAIN
MENU.
When you first activate the Telnet Console Utility’s MAIN MENU,
you may find that the arrow keys on your keyboard initially have no
effect on the cursor. If that’s the case, first click on Terminal, located