User`s manual

AA
AA
A. Telnet Console
This appendix contains instructions and illustrations that explain how
to use Telnet Console Interface. The following discussion and exa m-
ples were generated by running Telnet from a Windows NT host.
Starting Telnet
From the Windows NT desktop click on Start and then choose Run.
As shown below, type
telnet [NPort Express IP address]
in the Open text box, and then click OK to begin the Telnet session.
(We are assuming that the IP address for this example is
192.168.3.95.)
You should see a window requesting the Console terminal type you
would like to use. Type 1 for ansi/vt100 and then press Enter.
This activates the Telnet Console Interface utility program. In what