User`s manual

This function is provided so that you can load a configuration file that
was previously saved. You may load the desired configuration file
when initiating NPort Monitor.
To load a saved configuration file, do the following (you may refer to the
figure used in the previous subsection):
1. Click on File and choose Load Configuration, or simply click on
the toolbar Load Configuration icon.
2. Navigate to the directory that contains the configuration file you
would like to load (recall that the file extension is .mnt).
3. Click on the file name, or type the name into the File name text
input box.
4. Click on Open to load the selected configuration file.
Monitor
After a configuration has been set up, or a configuration file has been
loaded, NPort Server Monitor will automatically start monitoring
servers and ports. You can refer to the figure below for an example of
the type of monitoring information that will be displayed. (Check the
Help menu to find additional information about using this program.)
NPort Server Monitor will use colors to differentiate the current status
of server ports.
q Black means that the port is currently hooked up to your LAN
and is active.