User`s manual

5. Click on the Select Item tab to open the list of options shown be-
low. This function is provided so that you can select monitoring
items according to your need. Items selected will be displayed in
the NPort Server Monitor screen. Check or uncheck the boxes as
needed.
6. Click the General tab to set up the Sampling interval. Sampling
time is the time interval for updating the current data of NPort Ex-
press, where the time interval ranges from 1 to 20 seconds. Select
a number from the pull-down list to set up the time, and then click
OK.
7. After returning to the NPort Server Monitor window, the servers
and ports that were selected will be listed in the info box. General
information such as Model No., NPort Server Name, OP_mode,
NPort Server IP Address, and Port No. will also be displayed.