User`s manual

4. Click on Add.
5. Enter the Destination, Gateway, Netmask and Metric as needed.
6. Click OK to exit Gateway Settings.
7. Click OK to exit Server Properties.
8. Save Configuration as needed.
Modifying Routes
1. Start NPort Manager.
2. Select the server whose routes you want to modify.
3. Select Server Properties from the toolbar, or double click on the
server.
4. Click on the Advanced tab.
5. Select the route settings you want to change, and then click on
Modify.
6. Click OK to exit Gateway Settings.
7. Save Configuration as needed.
Removing Routes
1. Start NPort Express Manager.
2. Select the server whose routes you want to remove.
3. Select Server Properties from the toolbar or double click on the
server.
4. Click on the Advanced tab.
5. Select the route setting you would like to remove, and then click
on Remove.
6. Click OK to exit Gateway Settings.
7. Save Configuration as needed.