User`s manual

server will be listed in the right info box.
2. Click on the port to highlight it.
3. Click on the Unmap Port icon to remove the selected port. In the
example shown here, we deleted Port 1, as indicated by the
“ellipses” (…) under COM, and a missing “plug” icon under Port
(compare to Fig. 3-1).
Server Properties—Change Name
You may modify the server name by using the toolbar Properties
function.
1. Start NPort Express
Manager, and then click
on the name of the server,
listed in the left info box,
whose name you want to
change.
2. Click on the toolbar
Properties icon.
3. Modify the server name
as desired.
4. Click OK to save the
configuration.
Server Properties—Change Password
To add more security to your NPort Express, it is highly recom-
mended that you set a password. If you did not set the password while
running the Add Server Wizard, or you would like to change the cur-
rent password, you may use the toolbar Properties function to do so.
You may also use this function to “Auto-Save”, i.e., to have your
Windows OS remember the password for you. By auto saving the
password, you will not be asked to enter the password when modify-
ing server properties from this computer. (Keep in mind that other
people using your computer will also have ready access to the NPort
Express Manager functions.)
1. Start NPort Express Manager, and then click on the name of the