User`s manual

anymore, then you can use NPort Express Manager to delete it. First
highlight the name of the server you would like to remove, and then
click on the toolbar Delete Server icon.
Map Port
You may use NPort Express Manager to change previously assigned
COM names. Click on the toolbar Map Port icon, and then follow the
procedure given below:
1. Start NPort Express Manager,
and then click on the name of
the server, listed in the left info
box, whose port number you
would like to change.
2. The port on this particular
server will be listed in the right
info box. Click on the port to
highlight it.
3. Click on the toolbar Map Port
icon.
4. Select the new COM port name
you would like to map to.
.Note: It does not matter if the Mapping COM number consecutively check
box is checked or unchecked since there is only one port.
5. Click OK to finish, and return to the NPort Express Manager main
window.
Unmap Port
If you do not need to use a port any more, you may use the toolbar
Unmap Port function to remove it from your Windows NT operating
system.
1. Click on the server you would
like to modify. The port on that