User`s manual

3. When the Telnet window opens up, type 1 to select ansi/vt100 for
Console terminal type, and then press Enter.
4. A connection between your computer and NPort Express should
now be established, and the MOXA NPort Express utility program
will automatically start running.
5. To ensure proper operation, click on the Terminal menu, choose
Preferences…, and then make sure VT100 Arrows is checked.
.Note: Not choosing VT100 Arrows could result in inadvertently
changing the server’s name and IP address.
6. Use the keyboard arrow keys to highlight [serverConfig] as
shown below, and then press Enter to select this option.
7. A window showing the various parameters required to configure
NPort Express opens up. Those parameters that are “configurable”
are enclosed in square brackets, and those parameters that are