Setup guide

GRAVIMETRIC GATEWAY AND ETHERNET COMMUNICATIONS

E. The Basic Settings screen will appear.

Enter a unique name in the AP Name

field. The IP Settings screen will now

appear. It is recommended that the G2

network have static IP addresses. From

the network settings drop-down menu,

select Static IP. Enter an IP Address,

Subnet Mask appropriate for your

network. Click Next to proceed.

F. The Basic Wireless Setting screen will

appear. Enter your wireless network’s

SSID. For this example we are using G2-

WIRELESS. The wireless channel can be

left at the default setting. Then click

Next.

G. The Security screen will appear. Select

the level of Wired Equivalency Privacy

(WEP) encryption for your network. If

you are using a passphrase, enter the

passphrase into the passphrase field. If

you will be entering a WEP key, leave the

passphrase field blank. Then click Next.

H. The second Security screen shows the

WEP key. If you entered a passphrase,

then the Key 1 field will display the

automatically generated WEP key. If you

did not enter a passphrase then enter the

WEP key into the Key 1 field. Click

Next.

The WEP key will be require when configuring the Wireless Serial Server so if

a key was automatically generated from a passphrase, record the WEP key at

this time.