User`s manual

NPort S8000 Series Introduction
1-4
EMS:
EN 55024,
IEC 61000
-4-2 (ESD) Level 4,
IEC 61000
-4-4 (EFT) Level 4,
IEC 61000
-4-5 (Surge)
Level 1 for serial ports,
Level 2 for LAN ports,
Level 3 for power lines
Warranty
Warranty Period:
5 years
Details:
See www.moxa.com/warranty
Device Server Specifications
Serial Interface
Number of Ports:
4
Serial Standards:
RS-232/422/485
Con
nector: DB9 male
Serial Line Protection:
• 15 KV ESD protection for all signals
• 2 KV isolation protection
RS
-485 Data Direction Control: ADDC® (automatic data direction control)
Pull High/Low Resistor for RS
-485: 1 KΩ, 150 KΩ
Terminator for RS
-485: 55 Ω, 120 Ω
Console Port:
Dedicated RS-232 console port (8-pin RJ45)
Serial Communication Parameters
Data Bits:
5, 6, 7, 8
Stop Bits:
1, 1.5, 2
Parity:
None, Even, Odd, Space, Mark
Flow Control:
RTS/CTS and XON/XOFF
Baudrate:
50 bps to 921.6 Kbps
Serial Signals
RS
-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS
-422: Tx+, Tx-, Rx+, Rx-, GND
RS
-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS
-485-2w: Data+, Data-, GND
Software
Configuration Options:
Web Console, Telnet Console, Serial Console, Windows Search Utility
Windows Real COM Drivers:
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64,
Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers:
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6,
Solaris 10, FreeBSD, A
IX 5.x
Linux Real TTY Drivers:
Linux kernel 2.4.x, 2.6.x
Operation Modes: Real COM, TCP Server, TCP Client, UDP, RFC2217
Management:
SNMP MIB-II
IP Routing:
Static, RIP-I, RIP-II
Reliability
Alert Tools:
Built-in buzzer and RTC (real-time clock)
A
utomatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures):
200,951 hrs