User`s manual

NPort S8000 Series Switch Featured Functions
6-12
Setting up Turbo Chain
1. Select the Head switch, Tail switch, and Member switches.
2. Configure one port as the Head port and one port as the Member port in the Head switch, configure one port
as the Tail port and one port as the Member port in the Tail switch, and configure two ports as Member ports
in each of the Member switches.
3. Connect the Head switch, Tail switch, and Member switches as shown in the diagram.
The path connecting to the Head port is the main path, and the path connecting to the Tail port is the back up
path of the Turbo Chain. Under normal conditions, packets are transmitted through the Head Port to the LAN
Network. If any Turbo Chain path is disconnected, the Tail Port will be activated to continue packet
transmission.
Configuring “Turbo Chain”
Head Switch Configuration